Using your refrigerator Air Outlet
Setting the Controls.. .
Controls for adjusting temperatures are In both the
refrigerator and the freezer
To start:
1 Set the TEMPERATURE CONTROL (In the refrlgera-
tor) to 3.
2. Set the AIR CONTROL (In the freezer] to 3
Air Control - Set on 3
Give the refrigerator trme to cool down com-
pletely before addlng focd (This may take several
hours). The control console has directions for adjust-
ing temperatures. if needed. Controls will be set
about right if your milk or turce
IS
as cold as your
family likes it, and when Ice cream is firm.
Do not block the air outlets
on either control
panel. That can slow the arr movement needed to
keep temperatures at the level you set.
OFF
qi=ij”;
The
POWER SAVING CON-
TROL on the control panel in the
refrigerator operates electric
SAVES
REDUCES
heaters. These heaters help pre-
POWER EXTERIOR
vent moisture from formrng on
MOISKJRE the outside of the refrigerator
0~
Setting Helps
when humldlty 1s high
Save Energy
l
Use the OFF setting when humidity
IS
low
l
Use ON if moisture forms on the outside of the
refrigerator
The Meat Pan Air Control...
Cold air flows against the
meat pan through an opening
between the freezer and the
refrigerator This helps keep the
meat pan colder than the rest
of the refrigerator
Set the control to let more or
less cold air through.
Colder Meat Storage
Use Control to Adjust
Meat Pan Temperatures
Adjusting Shelves...
Shelves can be adjusted to match the way you use
your refrigerator
To
remove shelves:
I Tilt up at front
2 Lift up at back
3 Pull shelf straight out
To replace:
I. Guide the rear hooks into the slots in the shelf
SUppOtS.
2. Trlt up front of shelf until hooks drop into slot. Lower
front of shelf to level positron