Using your refrigerator, Setting the control

Using your refrigerator

TEMPERATURE

CONTROL

LIGHT SWITCH

RUN SWITCH

The control for the refrigerator temperature is in the EfrigerCItOr. When the refrigerator is plugged in and the Run Switch is moved to ON:

Give the refrigerator time to cool down com-

pletely before adding food. (This may take sev-

era1 hours.)

TEMPERATURE

This setting should be about right for normal

household refrigerator usage. -

	The control will be set about right when milk or
	juice is as cold as you like. In hot weather or if the
	door	is opened			often,	turn the		control to a higher
	number		to	keep	the	temperature			you	like.	If the
	milk	or	juice	is too cold		or	refrigerator		items		start to
	freeze, turn the control to a lower number or adjust
	the freezer tray damper. Wait 24 hours after an ad-
	1justment		is made		before		further	change		is made
l Set the Thermostat Control to 3.	to the controls.

The freezer tray is located under the freezer compartment.

The damper at the rear of the freezer tray helps

control the refrigerator temperature for warm weather operation. The damper can be adjusted

for proper cooling and defrosting of the refrigerator.

To adjust the damper:

1.Pull out the freezer tray.

2.Lift out the damper from the rear of the tray.

3.Slide damper into the desired position.

NOTE: “B, C, D” positions provide fine cooling adjustments to best meet your cooling needs in warm weather.

POSITIONS

A - (Closed)

COOLING AND DEFROSTING.

D-

E - (FULL Open]

N FOR WARM

WEATHER SETTING.