Whirlpool ET16AK manual Moving the meat pan and cover, Changing the light bulb, shelves

Moving the meat pan and cover...

The meat pan and cover can be removed for cleaning and moved to another shelf, if desired. Remove the meat pan first.

Removlng:

I. Slide meat pan out to stop.

2.Lift the front of meat pan.

3.Slide pan the rest of the way out.

4.To remove cover, push up glass insert from bottom, then lift out with both hands.

5.Lift cover frame straight up and out.

Replaclng:

1. To replace	cover,	fit notches in cover frame sides	I
over center	shelf	support.

2.Lower cover frame into place.

3.Lower glass insert into cover frame

Cover Frame	4.	To replace	pan,	fit edges of pan into supports on
		covet
	5.	Slide meat	pan	into place.

Changing the light bulb.. .

WARNING: Before removing the light bulb, either
unplug the refrigerator or disconnect
the	electricity	leading	to	the re-				contrbi	consdle to	find bulb.
frigerator at the main power				supply.	1. Reach		behind
Shock and injury can occur				if elec-	2.	Remove	bulb.
tricitv	remains	connected.			3.	Replace	with	a 40-watt	appliance	bulb.

Removing crispers and crisper cover.. .

Pull out to Stop. Lift the Front and Pull Aaain.

Removing the Crispers:

1.Slide crisper straight out to stop, lift front, then slide the rest of the way out.

2.Replace in the reverse order.

Removing Cover:

I. Push up glass insert from bottom, then slide out with both hands.

2.Lift front of cover frame and remove cover support

3.Lift out cover frame by pulling up and out.

Replacing Cover:

1. Fit back of cover into notch supports on walls of

Glass Insert,refrigerator, then lower front into place. Lift the Frame Front, 2. Replace cover support with the long tab

towards the front. Note: If the support needs adjustment, turn base right to raise, or lefi to lower.

3. Slide back of glass insert into place, then lower front.

Adjusting the refrigerator

7.First, remove food from shelf.

2.Slide shelf straight out to stop.

3.Lift front.

4.Slide the rest of the way out.

shelves...

Guide Stop

Shelf Stop

Replacing Shelf:

1, Fit back of shelf on top of guides with wire stops on the bottom of guides.

2. Lift front, slide shelf in until it clears guide stops.

Removing and adjusting the

To remove shelf:

1.Lift front slightly

2.Lift back off supports.

3.Replace in reverse order.

To adjust shelf:

1.Remove shelf

2.Remove supports by sliding upwards

3.Replace supports on desired level.

4.Replace shelf.

6