37
• Press to stop the playback
and return to the scene index
screen.
1 During playback, press to
display the joystick guide.
2 Adjust ( ) the volume.
IMPORTANT
• Observe the following precautions while
the ACCESS indicator is on or flashing.
Failing to do so may result in permanent
data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
- Do not open the memory card slot
cover.
- Do not disconnect the power source
or turn off the camcorder.
- Do not change the position of the
mode dial.
• You may not be able to play back with
this camcorder movies recorded on a
memory card using another device.
NOTES
• Depending on the recording conditions,
you may notice brief stops in video or
sound playback between scenes.
• Sound from the speaker will be muted
when you close the LCD panel.
Use a pair of headphones when
you want to use the viewfinder for
playback.

Special playback modes

To enter the special playback modes,
you can use the buttons on the LCD
panel or wireless controller ( 17).
There is no sound during the special
playback modes.

Fast playback

During normal playback, press or
. Press again to increase the
playback speed to approximately 5x
15x
60x the normal speed.

Slow playback

In playback pause mode, press * or
. Press again to increase the
playback speed 1/8
1/4 the normal
speed.
* Slow reverse playback will look the same as
continuous frame reverse.

Frame Advance/Reverse

In playback pause mode, press or
on the wireless controller to
reverse a few frames (approx.
0.5 seconds) or to advance one frame.
Hold the button pressed for continuous
playback.

Skipping scenes

During normal playback push the
joystick ( ) or press on the wireless
controller to skip to the next scene.
Push the joystick ( ) or press on
the wireless controller once to return to
the beginning of the current scene or
twice to skip to the previous scene.

Ending special playback modes

During any special playback mode,
press on the camcorder or
on the wireless controller.
ADJUSTING THE VOLUME
/