Cannon HG20 Trimming Settings, Open the print settings menu, Select , Trimming Press

•Canon's PictBridge-compatible printers: If printing does not resume automatically

after you solved the problem, select

[Continue] and press to resume printing. If that option is not available,

select [Stop] and press and then restart printing from the beginning.

•Other printers or if the error still persists with a Canon printer: If printing does not resume automatically, disconnect the USB cable and turn off the camcorder. After a short while, turn on the camcorder and restore the USB connection.

IMPORTANT

•You may not be able to print correctly with a PictBridge-compatible printer photos whose file names have been changed or that were recorded, created, edited or changed with any device other than this camcorder.

•If [Busy] does not disappear, disconnect the USB cable and restore the connection after a short while.

Trimming Settings

Set the paper size and page layout before changing the trimming settings. Trimming settings apply to one photo only.

1Open the print settings menu.

Refer to steps 1-2 in Printing after Changing the Print Settings ( 71).

2Select ( , ) [Trimming] and

press .

The trimming frame appears.

3Change the size of the trimming frame.

•Move the zoom lever toward T to

shrink the frame, and move it

toward W to enlarge it. Press to change the orientation of the frame (portrait/landscape).

•To cancel the trimming settings, move the zoom lever toward W until the trimming frame disappears.

4Move (, ) the trimming frame to the area you want to print.

5Press FUNC. to return to the print settings menu.

•The print area selected will be indicated by a green frame within the thumbnail.

•To change other print settings and print the area you selected refer to steps 3-5 in Printing after Changing the Print Settings

( 71).

73