Photos

Photos will be recorded on the media

selected for recording photos ( 31).

Protecting Photos

You can protect photos from accidental erasure.

Protecting Single Photos

1Open the photo selection screen.

 

FUNC.

[

Protect]

[

Protect] appears on the screen.

2Select ( ) the photo you want to protect.

3Press to protect the photo.

appears on the bottom bar and the photo cannot be deleted. Press again to remove the protection.

4Repeat steps 2-3 to protect additional photos or press FUNC. twice to close the menu.

Protecting Photos from the Index Screen

Options

[Individual Photos]

Opens the same screen described in Protecting Single Photos ( 68). Continue from step 3 of that procedure to protect the photo.

[Selected Photos]

Protects all the photos selected in advance (marked with a checkmark). Refer to Selecting Recordings from the Index Screen ( 41).

[Remove All]

Removes the protection from all photos.

FUNC.

[

Protect]

 

Desired option

[Yes]

[OK]

FUNC.

 

 

 

 

IMPORTANT

Initializing the recording media ( 31) will permanently erase all recordings, including protected photos.

Copying Photos

You can copy photos only from the hard disk to the memory card.

Copying a Single Photo

1Select to view the photos recorded on the hard disk.

Select the tab ( 38) and move the zoom lever toward T to return to single photo view.

2Select ( ) the photo you want to copy.

3Copy the photo to the memory card.

FUNC. [ Copy ( )]

[Yes] FUNC.

68

Page 68
Image 68
Cannon HG20 instruction manual Protecting Photos, Copying Photos, Protecting Single Photos Open the photo selection screen