Cannon HG20 instruction manual 110, Direct Print Related Messages

Additional Information

Disc access failure. Check the disc.

-There was an error when reading the disc or attempting to write onto it.

-This message can appear also if condensation has formed ( 118). Wait until the DVD burner dries completely before resuming use.

-The disc may not be loaded correctly. Try removing the disc and reinserting it.

Error reading the data

-Error while reading the recordings from the camcorder.

-Check that the USB cable was not accidentally disconnected.

No disc

-Insert a disc into the DVD Burner.

-This message can appear also if condensation has formed ( 118). Wait until the DVD burner dries completely before resuming use.

No photos

- There are no photos to add to the disc.

No scenes

- There are no movies to add to the disc.

No scenes left to add

- There are no scenes that have not already been added to discs created previously.

No transfer orders

- No photos have been marked with transfer orders ( 87).

Operation canceled

- The USB cable was disconnected and the operation was canceled. Check the USB connection.

Reading the disc

- Reading data from the disc.

Unable to recover data

- Could not recover a corrupted file.

Direct Print Related Messages

Cannot print this photo

-You attempted to print a photo that was recorded with another camcorder, has a different compression, or was edited on a computer.

Cannot trim this photo

- You attempted to trim a photo that was recorded with another camcorder.

Check print settings

- Current print settings cannot be used for printing with the button.

Data transfer error

-The printer is experiencing a data transfer error. Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the printer back on and reconnect the USB cable. When you are printing using the button, check the print settings.

-You attempted to print from a memory card that contains a large number of photos. Reduce the number of photos.

110