Changing the light bulb...
1. Reach behind the control console to find bulb.
2. Remove bulb.
3. Replace with a
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you
use your refrigerator. Model ET18GK has glass shelves. Glass shelves are heavy. Be careful.
Moving the meat pan and cover...
The meat pan can be taken out and moved the same way as the shelves. Remove the meat pan first
To remove the shelves:
1.Tilt up at front.
2.Loftup at back.
3.Pull shelf straight out.
To replace the shelves:
1.Guide the rear hooks into the slots in the shelf supports.
2.Tilt up front of shelf until hooks drop into slot. Lower front of shelf to level position.
To remove the meat pan and cover:
1.Slide meat pan out to the stop.
2.Lift the front of meat pan.
3.Slide pan the rest of the way out.
4.Tilt cover up at front.
5.Lift up at back.
6.Pull straight out.
To replace the meat pan and cover:
1.Guide the rear hooks of cover into the slots in the shelf supports.
2.Tilt up front of cover until rear hooks drop into slots. Lower front of cover to level position.
3.Replace meat pan in reverse order of removal.
Removing crispers and crisper cover...
PULL OUT TO THE STOP. LIFT THE
PULL AGAIN.
To remove the crispers:
1.Slide crisper straight out to the stop, lift front, then slide the rest of the way out.
2.Replace in reverse order.
To remove the cover:
1.Push up glass insert from the bottom, then slide out with both hands.
2.Lift front of cover frame and remove cover support.
3.Lift out cover frame by pulling up and out.
To replace the cover:
LIFT THE FRAME FRONT, 1. Fit back of cover into notch supports on walls of refrigerator, then lower front into place.
2.Replace cover support with the long tab toward the front. NOTE: If the support needs adjust- ment, turn base right to raise, or left to lower.
3.Slide back of glass insert into place, then lower front
