2 Use your TV
Watch TV
Switch TV on or off
Switch the TV on
∙Connect the TV to the mains outlet and press the mains power switch.
∙If the TV is on standby, press 
on the remote control or on the rear panel of the TV.
Note: There is a short delay before the TV
responds.
Tip: If you cannot find your remote control and want to switch the TV on from standby, press any key on the rear panel of the TV.
Switch TV to standby
Press 
on the remote control or on the rear panel of the TV.
The remote control sensor on the TV switches to red.
Switch off the TV
Turn off the mains power switch. The TV switches off.
Note: Though your TV consumes very little energy when it is in standby or switched off, it does use some energy. If you are not going to use the TV for an extended period of time, disconnect the TV from the mains plug.
EN 12
Automatic switch off
You can save energy with this TV's energy efficiency settings. The settings are enabled by default, so that if there is no user interaction (such as pressing a remote control button or a control on the rear panel) for four hours, the TV will automatically switch to standby.
To disable automatic switch off
1.While you watch TV, press the Green button on the remote control.
2.Select [Auto switch off], then press OK. A confirmation message is displayed.
Adjust TV volume
Increase or decrease the TV volume
∙Press +/- on the remote control.
∙Press 
+/- on the side of the TV.
Mute or unmute the TV volume
∙Press 
to mute the TV.
∙Press 
again to restore the volume.
Adjust headphone volume
1.Press 
> [Setup] > [TV settings] > [Sound].
2.Select [Headphones volume], then press OK.
3.Press the Navigation buttons to adjust the volume.
