Tip: Keep the wireless USB adapter connected to the TV.

WPS - Wi-Fi Protected Setup

1.If your router supports WPS (WiFi Protected Setup), press the WPS button on the router.

2.After 2 minutes, select [WPS] on the TV, then press OK.

The TV connects to your network. This takes about 2 minutes.

Most new wireless routers have the WPS system and carry the WPS logo. The WPS system uses WPS security encryption and cannot be combined with devices on your network that use the WEP (Wired Equivalent Privacy) security encryption.

If you still need the WEP devices in your network, install with [Scan] > [Custom].

Scan for routers

If you have several routers in your network, you can select the network you need.

1.To select a specific network router, press [Scan] on the first page of the installation. The routers with WPS and the strongest signal are shown first in the list on screen.

2.Select the router you need, then press OK.

If you are connecting to a WPS router, select [WPS] on the TV.

If you want to set the PIN code in your

router software to connect, select [WPS pin] and note down the code.

To enter the encryption key manually, select [Standard] and enter the key when prompted.

Set secured connection with WPS encryption

1.To set the secured connection with a PIN code, select the [WPS pin] and press OK.

2.Write down the 8-digit PIN code shown on TV and enter it in the router software on your PC.

See the router manual for where to enter the PIN code.

Set secured connection with WPA

 

encryption

English

If your router has WPA (WiFi Protected

 

Access) security, enter the pass phrase with

 

the remote control.

 

1.To enter the encryption key (the security key) manually, select [Standard] and press OK.

2.To access the onscreen keyboard, select the text entry field, then press OK.

Set secured connection with WEP encryption

If your router has WEP security, the TV asks for the WEP encryption key in hexadecimal numbers.

1.Locate the hexadecimal key in the router software on your PC and make a note of of the first key in the WEP keys list.

2.Enter the security key on the TV with the remote control to connect to the router.

3.If prompted, agree to the End User Licence Agreement.

TV network name

If you have more than one TV in your home network, you can rename this TV to give it a unique name.

1. Press > [Setup] > [Network settings], and select [TV network name].

2.To enter the name, press OK to open the onscreen keyboard or use the remote control keypad.

EN 55

Page 55
Image 55
Philips PFL43X7T/12, PFL43X7K/12, PFL43X7H/12 TV network name, Scan for routers, If your router has WPA WiFi Protected