Note: You can use the same HDD to record and Pause TV shows.
To check if the programme guide supports recording:
Press and select [Programme guide]. If you find the [TV Recording] button on the programme guide page, you can set up and manage recordings.
Connect a USB 2.0 compatible hard disk drive (HDD) with a minimum capacity of 250 GB and a minimum transfer speed of 30 megabytes per second.
∙
Make sure that your TV is connected to the Internet through a high-speed broadband connection. See Connect your TV > Network and the Internet
(Page 53).
∙
What you need
To record TV programmes, do the following: ∙ Tune your TV to receive digital TV
channels (DVB broadcast or similar). See Set up your TV > Channel
Settings > Automatic installation (Page 35).
In Nordic countries, the TV provides limited support for subtitles while recording TV programmes.
∙
Recording is only supported in countries with Internet programme guides and when your TV is connected to the Internet.
∙
Record TV shows
What you can do
If your TV is connected to the Internet, you can record TV programmes onto a USB hard drive. You can either record current TV programmes or a future TV programme.
Start and manage the recordings from the
electronic programme guide on the TV. See Use your TV > View programme guide >
From the Internet (Page 15). Note:
Pause a live TV broadcast
1.On a digital channel, press 
to pause a TV programme.
2.Press 
to continue watching.
The status bar shows the following time
indicators:
A. When the programme was paused for
the first time.
B. Where the paused programme is
currently playing.
C. Where the live programme is currently broadcast.
∙To watch the stored broadcast, press 
or 
to search backward or forward.
∙To change playback speed, press 
or 
repeatedly.
∙To watch the live TV broadcast, press 
.
Note: You cannot pause the TV broadcast when a recording is in progress.
The stored broadcast on the USB hard drive is deleted if you do any of the following:
∙Disconnect the USB hard drive.
∙Start recording a TV programme.
∙Access Smart TV
∙Switch the TV to standby.
∙Switch to another channel.
∙Switch source to watch from a connected device - a Blu-ray disc player, digital receiver or USB storage device.
EN 24
