Philips PFL43X7K/12, PFL43X7T/12, PFL43X7H/12 user manual View Scenea

Retain picture quality

If your TV picture quality is affected by the picture-processing features of other devices, you can switch on Pixel Plus Link.

Switch on Pixel Plus Link

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink].

3.Select [Pixel Plus link] > [On], then press OK.

Maximise video display

Some subtitles create a separate subtitle bar under the video, which limits the video display area. To maximise the video display area, you can switch on auto subtitle shift. The subtitles are then displayed over the video image.

Switch on auto subtitle shift

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink] > [Auto subtitle shift].

3. Select [On], then press OK to activate.

Note: Make sure that the picture format of the TV is set to [Auto format] or [Movie expand 16:9].

Listen to another device while TV is in standby

You can listen to a connected HDMI-CEC compliant device through the TV speakers, even while the TV is in standby.

1.Press ADJUST to receive audio from the connected Philips EasyLink device.

If available, audio only mode is switched on.

2.Accept the prompt on the TV to turn off the TV screen.

3.Control the audio playback with the TV remote control.

View Scenea
What you can do	English

With Scenea, you can display a picture as the wallpaper on your TV. Display the default picture or load your own picture as the wallpaper.

The wallpaper is displayed for 240 minutes or for the duration of the sleeptimer.

Switch on

1.Press .

2.Select [Scenea], then press OK.

The default picture is displayed.

Note: The wallpaper is displayed for 240 minutes or for the duration of the

sleeptimer. For information about the sleeptimer, see Use more of your TV > Set

locks and timers > Sleeptimer (Page 30).

Load TV wallpaper

You can also load your own picture from a connected USB storage device or a connected PC as the wallpaper.

Note: When you load a new picture, it overrides the existing picture.

1.Connect the USB storage device to the TV or connect to the network.

2.Press .

3.Select [Browse USB] or [Your network], then press OK.

4. Select a picture, then press OPTIONS.

5.Select [Set as Scenea], then press OK.

6.Select [Yes], then press OK.

7.Press any button to exit Scenea.

EN 33