Whirlpool ET18JM Using your refrigerator, Setting the controls, Changing the control settings

Using your refrigerator

Refrigerator Control

Power Saving Control

Setting the controls.. .

TOR CONTROL to 3.

2 Set the FREEZER CONTROL to B

Freezer Control

Glve the refrigerator time to cool down com-

These settings should be about right for normal

household refrigerator usage.

The controls WIII be set about right when mrlk or jurce IS as cold as you like and when Ice cream

Changing the control settings.. .

If you need to adjust temperatures In refrrgerator or freezer, use the settings listed in the chart below

l

l

l

Adjust	the Refrrgerator			Control	first.
Wait	at least	24	hours	between	adjustments.
Then	adjust	the	Freezer	Control,	If needed.

.ca”	your	If Refrigerator
~e~v~cL~LINE”		Section		IS
assistance		TOO	COLD
		If ICE	Isn’t
telephone
		MADE		FAST ENOUGH
number
(paw	11).	If BOTH		SECTIONS

are TOO WARM

								RECOMMENDED CONTROL
REASONS:								SETTINGS:
Door	opened			often
Large amount of food added
Room		temperature				tco	warm
Door	opened			often
Large amount of food added
Very	cold		room		temperature
[can’t		cycle		often		enough)
Controls		not		set	correctly			Refrigerator
for your		condrtrons						Freezer
Heavy		Ice	usage					Refrrgerafor
Very	cold		room		temperature			Freezer
[can’t		cycle		often		enough)
Door	opened			often				Refrigerator
Large		amount		of		food	added	Freezer

Very warm or very cold

Power Saving Control.. .

The Power Savlng Control on the Control Con-

sole operates electrrc heaters around the door

openrngs. These heaters help keep moisture from forming on the outside of the refrigerator

I, Use the ‘CONSUMES LESS ENERGY- setting when

humidity IS low

2.Use the “REDUCES EXTERIOR MOISTURE” setting

only if moisture forms on the outside of the refrtgerator.