Whirlpool ET20EK manual Removing the freezer shelf

Adjusting	the refrigerator	shelves...
Shelves can be	adjusted to match the	way you use	To remove			shelves:
your refrigerator.			I,	Tilt up	at	front.
			2.	Lift up	at	back.
			3.	Pull shelf		straight out.

Moving the meat pan and cover.. .

The meat pan can be taken out and moved the same way as the shelves, Remove the meat pan first.

To replace:

I. Guide the rear hooks into the slots in the shelf supports.

2. Tilt up front of shelf until hooks drop into slot. Lower

front of shelf to level position.	.5.:-L%,..
L, *

Removlng:

I, Slide the meat pan out to stop.

2.Lift the front of meat pan.

3.Slide pan the rest of the way out.

4.Tilt cover up at front.

5.Lrft up at back.

6.Pull straight out

Replaclng:

1.Guide the rear hooks tnto the slots in the shelf supports.

2.Tilt up front of cover until rear hooks drop Into slots Lower front of cover to level position.

3.Replace meat pan in reverse order.

Removing the crispers and crisper covers...

Removlng crispers:

1.Slide crispers straight out to stop.

2.Lift the front.

3.Slide the rest of the way out.

4.Replace in reverse order.

Removing covers:

Covers are held in by two pegs at the back and two notched tabs in front.

1.Press front out of way.

2.Lift cover front.

3.Lift back out of pegs.

4.Replace in reverse order

If necessary, the center leg can be made shorter or longer to help level the crisper covers. Turn the leg clockwrse to make it longer.Turn the leg counterclock- wise to shorten it.

.. ..,.., r.. ._

Removing the freezer shelf.. . .

1 III? front sltghtly.

2.Lift back off supports

3.Replace in reverse order.

Ice cube trays.. .

To remove Ice:

I, Hold tray at both ends. 2 Slrghtly twist.

If cubes are not used, they may shrink. The moving cold air starts a slow evaporation. The longer cubes are stored. the smaller they get.

6