Using your refrigerator
POWER SAVING CONTROL LIGHT SWITCH FREEZER~CONTROL |
Setting the controls...
Controls forthe refrigerator and freezer are in the refrigerator, When the refrigerator is plugged in for the first time...
1.Set the REFRIGERA-
TOR CONTROL TO 4.
2.Set the FREEZER
+,*. ,ijl ,rr/ ..,,. | ^ .~ |
Give the refrigerator time to cool down com- pletely before adding food. (This may take sev-
These settings should be about right for nor- mal household refrigerator usage.
The controls will be set about right when milk or ice is as cold as you like and when ice cream is
Refrigerator Control adjustments range from 1 to
8. Freezer Control adjustments range from A to D.
Changing the control settings...
If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below.
l
l
l
Adjust the Refrigerator Control first.
Wait at least 24 hours between adjustments. Then adjust the Freezer Control if needed.
CONDITION: | REASON: |
|
|
| |
If Refrigerator | Door | opened | often |
|
|
Section is | Large | amount | of food | added | |
TOO WARM | Room | temperature | too | warm | |
RECOMMENDED
CONTROL SETTINGS:
.*
Refrigerator6
FreezerD
QUESTIONS?
...call your
If Freezer |
| Door | opened | often |
|
| |||
Section | is | Large | amount | of food | added | ||||
TOO WARM | Very | cold | room temperature | ||||||
|
|
| (can’t | cycle |
| often | enough) | ||
If Refrigerator | Controls | not | set correctly | ||||||
Section | is | for your | conditions |
|
| ||||
TOO COLD |
|
|
|
|
|
|
| ||
If ICE isn,;- | Heavy |
| ice | usage |
|
| |||
|
|
|
|
|
| ||||
MADE | FAST ENOUGH | Very | cold | room temperature | |||||
.. | ..- | i il .._. | (can’t | cycle |
| often | enough] | ||
|
|
|
|
|
|
| |||
If BOTH SECTIONS. | Door | obened | often |
|
| ||||
are TOO WARM | Large | amount | of food | added | |||||
|
|
| Very warm or very cold |
| |||||
|
|
| room | temperatures& |
|
| |||
Refrigerator4
FreezerA
Refrigerator2
FreezerA
Refrigerator4
FreezerA
Refrigerator6
FreezerC
ThnII 1.G
C)oeninas. . These heaters helo keep moisture from formingon the outside of the refrigerator.
1.Use the “CONSUMES LESSENERGY” setting when humidity is low.
2.Use the “REDUCESEXTERIOR MOISTURE” setting i moisture forms on the outside of the refrigerator
