Whirlpool ET20GM Adjusting the refrigerator shelves, Removing and adjusting the freezer shelf

Adjusting the refrigerator shelves...

Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.

GLASS SHELVES ARE

HEAVY. BE CAREFUL.

To remove glass shelves:

1.Tilt up at front.

2.Lift up at back.

3.Pull shelf straight out.

To replace glass shelves:

1.Guide the rear hooks into the slots in the shelf supports.

2.Tilt up front of shelf until hooks drop into slot Lower front of shelf to level position.

Removing and adjusting the freezer shelf...

To remove the shelf:

1. Lift front slightly.

2. Lift back off supports.

3. Replace in reverse order.

To adjust the shelf:

1. Remove shelf.

2. Remove supports by sliding upwards.

3. Replace supports on desired level. SHELF SUPPORT 4. Replace shelf.

Removing

REMOVE THE

LlFl THE FRAME THEN THE BACK.

crispers and crisper cover...

PULL OUT TO THE STOP, LIFT THE FRONT

AND PULL AGAIN. To remove the crispers:

1.Slide crisper straight out to the stop, lift front, then slide the rest of the way out.

2.Replace in the reverse order.

To remove the cover:

1.Push up glass insert from bottom, then slide out with both hands.

2.Lift front of cover frame.

3.Lift out cover frame by pulling up and out.

4.Remove metal cover support.

To replace the cover:

1.Replace metal cover support on wall supports in front section of cabinet.

2.Fit back of corner into notch supports on walls of refrigerator, then lower into place.

3.Slide back of glass insert into place, then lower front.

GLASS IS HEAVY.

BE CAREFUL.

Moving the meat drawer and cover...

PULL OUT TO THE STOP. LIFT THE ,,

6 AVY.

To remove the meat drawer:

1.Slide the meat drawer out to the stop.

2.Lift the front.

3.Slide the drawer the rest of the way out.

4.Replace in reverse order.

To remove the cover:

1.Tilt front of cover up, lift at back, and pull straight out.

2.Replace in reverse order.