Changing the light bulbs
Electrical Shock Hazard
Before removing a light bulb, either unplug the refrigerator or disconnect the electricity leading to the refrigerator at the main power supply.
Failure to do so could result in electri- cal shock or personal injury.
To change the refrigerator light:
1.Disconnect refrigerator from power
2.Reach behind the Control Panel to remove bulb.
3.Replace with a
4.Reconnect refrigerator to power supply.
To change freezer light:
1.Disconnect refrigerator from power supply.
2.Grasp top and bottom of light shield.
3.Squeeze and pull light shield out.
4.Replace with a
5.Snap light shield into place.
6.Reconnect refrigerator to power supply.
NOTE: Not all commercial appliance bulbs will fit your refrigerator. Be sure to replace a bulb with one of the same size and shape.
Removing | the base | grille |
To remove the grille: |
| |
1. Open refrigerator | door. | Condenser |
2.Pull base grille forward to ; elease the support tabs from the metal clips.
3.Do not remove Tech Sheet fastened behind the grille.
To replace the grille:
1.Line up grille support tabs with metal clips.
2.Push firmly to snap into place.
3.Close refrigerator door.
See cleaning instructions for defrost pan and
condenser coils on page 18.
