Using your refrigerator
Setting the controls.. .
Controls for the refrigerator and freezer ore In the refrigerator. When the refrigerator IS plugged In for the first time
y@’ | ‘9’ |
1 Set the TEMPERA- | 2. Set the AIR CON- |
TURE CONTROL to 3. | TROL to B. |
Glve the refrigerator time to cool down com- pletely before adding food. [This may take sev-
erol hours.)
These settings should be about right for normal household refrigerator usage.
The controls will be set about right when milk or juice is as cold as you llke and when ice cream isfirm.
Do not block the air outlet on the control panel Blocking it con slow the air movement needed to keep temperatures at the level you set.
Changing the control settings.. .
If you need to adjust temperatures in the refriger- ator or freezer, use the settings listed in the chart below.
l
l
l
Adjust the Temperature Control first
Wait at least 24 hours between adjustments Then adjust the Air Control, if needed
CONDITION :
If Refrigerator
Section 1s
TOO WARM
REASONS:
Door opened often
Large amount of food added Room temperature too worm
RECOMMENDED SETTINGS:
Temperature | Control | 4 |
Air Control |
| C |
I
If Freezer
Section IS
TOO WARM
Door opened often
Large amount of food added Very cold room temperature
Temperature | Control | 4 |
Air Control |
| A |
QUESTIONS?
.coIl | your | If Refrigerator | |
service |
| TOO COLD | |
assistance | |||
If ICE Isn’t | |||
telephone | |||
MADE FAST ENOUGH | |||
number | |||
| |||
(page | 15). | If BOTH SECTIONS | |
|
| ||
ore TOO WARM
[can’t cvcle often enouahl
Controls not set correctly for your ccnditlons
Heavy Ice usage
Very cold room temperature (can’t cycle often enough)
Door opened often
Large amount of food added Very worm or very cold room temperatures
Temperature | Control | 2 |
Air Control |
| B |
Temperature | Control | 3 |
Air Control |
| A |
Temperature | Control | 4 |
Air Control |
| B |
Power Saving Control.. .
The Power Saving Control on the Control Con- sole operates electric heater around the door open- Ings. These heaters help keep moisture from forming on the outside of the refrigerator
1.Use the “OFF” set- tlng when humidity low
2.Use the “ON”settl& if moisture forms
on the outside of the refrigerator.
5
