Changing the light bulb.. .
Before removing the light shield for cleanrng or for replacrng the bulb, unplug the refrigerator. Use opphonce buibs on/y
Push in the Center;
light bulb behind light shield:
1.Push lightly on top center of the light shield until the notched tab unhooks from the control panel.
2.Pull down on the shield until the tab clears the con- trol panel.
3.Lift the back hooks out of the slots.
4.Replace with a 40.watt appliance bulb
5 Replace light shield in reverse order.
Optional automatic ice maker.. .
i Lower Slgnal Arm to Start It.
daise Signal
Arm to Stop Ice Maker.
If you have the automatic ice maker accessory or plan to add one later [Part No.
l The ON/OFF lever ISa wire signal arm. Downfor making ice automatically, Up. .to shut off the ice maker
l Shake the brn occasionally to keep cubes sepa- rated, and to obtarn increased storage capacity.
l It IS normal for ice crescents to be attached by a corner. They will break apart easily.
l Ycu will hear water running when ice maker IS working. You’ll hear ice fall into the bin. Don’t let these sounds bother you.
l The Ice maker will not operate until the freezer is cold enough to make ice. This can take overnight.
l Because of new plumbing ccnnectrons, the first ice may be discolored or
l If ice is not being made fast enough and more ice is needed, turn the Temperature Control toward a higher number. Wait a day and, if necessary, turn the Air Control toward A.
l If you remove the ice bin, raise the signal arm to shut off the ice maker. When you return the bin, push it all the way in and lower the arm to the ON posrtron.
l If cubes are stored too long, they may develop an
Removing the base grille.. .
l Open the door
l Pull grille outwards as shown.
l Do not remove Tech sheet fastened behind grrlle
SuDDort Tabs
To replace:
l Line up grille support tabs with metal clips
lPush firmly to snap Into place l Close the door
