Whirlpool ET22ZK manual Adjusting the refrigerator shelves, Moving the meat pan and cover

Models: ET22ZK

1 16
Download 16 pages 44.52 Kb
Page 6
Image 6
Adjusting the refrigerator shelves...

Adjusting the refrigerator shelves...

Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.

To remove glass shelves:

1.Ilt up at front.

2.Lift up at back.

3.Pull shelf strarght out

Gloss shelves ore heavy Be corefui

i ,~--.+; .,..:_ ., ‘>,f.

Moving the meat pan and cover.. .

The meat pan can be taken out and moved the same way as the shelves. Remove the meat pan first.

To replace:

1.Guide the rear hooks Into the slots in the shelf supports.

2.Tilt up front of shelf until hooks drop into slot. Lower front of shelf to level posrtron.

Removlng:

1, Slide the meat pan out to stop.

2.Lift the front of meat pan.

3.Slide pan the rest of the way out.

4.Tilt cover up at front.

5.Lift up at back.

6.Pull straight out.

Replaclng:

I, Guide the rear hooks into the slots in the shelf supports.

2.Tilt up front of cover until rear hooks drop into slots. Lower front of cover to level position.

3.Replace meat pan in reverse order.

_ .,_ .-_. -.

Removing the crispers and crisper covers...

I

Removing crispers:

1.Slide crispers straight out to stop.

2.Lift the front

3.Slide the rest of the way out.

4.Replace in reverse order.

Push the Tab to Clear

the Cover.

Removing

covers:

 

 

 

 

 

 

 

 

 

 

Covers are held in by two pegs at ttie back and two

 

 

 

 

into

Place.

 

 

notched tabs in front

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Press front

out of way

If necessary

the

center

leg can be made shorter or

2.

Lift cover

front.

longer

to

help

level

the

crsper

covers

Turn the leg

3

Lift back

out of pegs.

clockwise

to make

it longerTurn

the leg

counterclock-

4.

Replace

In reverse order

wise to

shorten

it.

 

 

 

 

 

Removing the freezer shelf.. .

1 Lift front slightly

2. Lift back off supports

3 Replace In reverse order.

Lift the Front

Then the Bat

Ice cube trays.. .

To remove ice:

I. Hold tray at both ends. 2. Slightly twist.

If cubes are not used, they may shrink. The movtng cold air starts a slow evaporation. The longer cubes are stored, the smaller they get.

6

Page 6
Image 6
Whirlpool ET22ZK manual Adjusting the refrigerator shelves, Moving the meat pan and cover, Ice cube trays