UsingYourRefrigerator
TEMPERATURE
CONTROL
OFF
Setting the control
The Temperature Control for the refrigerator and freezer is in the refrigerator. When the refrigerator is plugged in for the first time:
1. Set the Temperature Control to 3.
Give the refrigerator time to cool down completely before adding food. (This may take several hours.)
This setting should be about right for normal household refrigerator usage.
The control will be set about right when milk or juice is as cold as you like and when ice cream is firm.
.
REDUCES EXTERIOR
MOISTURE
POWER
SAVING
CONTROL
IFI
SAVES POWER | I |
l
Power saving control
The Power Saving Control on the Control Console operates electric heaters around the door open- ings. These heaters help keep moisture from form- ing on the outside of the refrigerator.
1.Use the SAVES POWER setting when humidity is low.
2.Use the REDUCES EXTERIOR MOISTURE setting if moisture forms on the outside of the refrigerator.
Changing the light bulb
Electrical Shock Hazard Before removing the light bulb, either unplug the refrigerator or disconnect the electricity leading to the refrigerator at the main power supply. Shock and injury can occur if electricity remains connected.
1.Disconnect refrigerator from power supply.
2.Reach behind the Control Console to find bulb.
3.Remove bulb.
4.Replace with a
5.Reconnect power supply.
5
