Using your refrigerator
Refrigerator | Control | / | light Switch | Freezer Control |
|
|
|
| |
|
| Power Saving | Control |
|
Setting the controls.. .
Controls | for the refrrgerator and freezer are tn the | ||
refrigerator |
| When the refrrgerator is plugged | tn for |
the first time. | PFPPIcFPnTnP | ||
1.Set the REFRIGERA- - TOR CONTROL to 3
2.Set the FREEZER CONTROL to B
Give the refrigerator time to cool down com- pletely before adding food. (This may take sev- eral hours )
These settings should be about right for normal
household refrigerator usage.
The controls will be set about right when milk or juice IS as cold as You like and when ice cream is firm
Changing the control settings.. .
If you need to adjust temperatures In refrigerator or freezer, use the settings listed in the chart below
l
l
l
Adjust the Refrigerator Control ftrst
Wait at least 24 hours between adjustments Then adjust the Freezer Control, if needed.
CONDITION:
If Refrigerator
Section IS
TOO WARM
If Freezer Section is
dA TOO WARM QUESTIONS ‘?
...call your If Refrigerator COOL
service | TOO COLD | |
asststance | ||
If ICE Isn’t | ||
telephone | ||
MADE FAST ENOUGH | ||
number | ||
|
(page 11)
If BOTH SECTIONS are TOO WARM
REASONS:
Door opened often
Large amount of food added Room temperature too warm
Door opened often
Large amount of food added Very cold room temperature [can’t cycle often enough)
Controls not set correctly for Your condrtrons
Heavy ice usage
Very cold room temperature [can’t cycle often enough]
Door opened often
Large amount of food added Very warm or very cold room temperatures
RECOMMENDED CONTROL
SETTINGS:
Refrigerator
Freezer
Refrigerator3
FreezerA
Refrigerator
Freezer
Refrtgerator
Freezer
Refrigerator
Freezer
Power Saving Control.. . | .< |
|
The Power Saving Control on the Control Con- sole operates electric heaters around the door openings. These heaters help keep moisture from forming on the outside of the refrigerator
I.Use the CONSUMES LESSENERGY” setting when humidity is low
2.Use the “REDUCES EXTERIOR MOISTURE” setting only if moisture forms on the outside of the refrigerator.
