Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.
Gloss shelves are heovy Be careful.
To remove glass shelves:
1.Tilt up at front.
2.Lift up at back.
3.Pull shelf straight out.
To replace:
1.Guide the rear hooks into the slots in the shelf supports.
2.Tilt up front of shelf until hooks drop into slot. Lower front of shelf to level position.
Moving the meat pan and cover...
The meat pan can be taken out and moved the same way as the shelves. Remove the meat pan first.
Removlng:
I, Slide the meat pan out to stop.
2.Lift the front of meat pan.
3.Slide pan the rest of the way out
4.Tilt cover up at front.
5.Lift up at back.
6.Pull straight out.
Replaolng:
I. Guide the rear hooks into the slots in the shelf supports.
2.Tilt up front of cover until rear hooks drop into slots. Lower front of cover to level position.
3.Replace meat pan in reverse order.
Removing the crispers
Removlng crispers:
1.Slide crispers straight out to stop.
2.Lift the front.
3.Slide the rest of the way out.
4.Replace in reverse order,
and crisper covers... | I |
|
Push the lab to Clear
the Cover.
Removlng covers:
Covers are held in by two pegs- at the back and notched tabs in front.
1.Press front out of way,
2.Lift cover front.
3.Lift back out of pegs.
4.Replace in reverse order
Snap Back into Place.
If necessary, the center leg can be made shorter or longer to help level the crisper covers. Turn the leg clockwise to make it longerTurn the leg counterclock- wise to shorten it.
Removing the freezer shelf.. .
1.Lift front slightly.
2.Lift back off supports.
3.Replace in reverse order,
Lltt the Front
Then the Back
Ice cube trays.. .
If cubes are not used, they may shrink. The moving cold air starts a slow evapcration. The longer cubes are stored. the smaller they get.
To remove ice:
1.Hold tray at both ends.
2.Slightly twist.
6
