Whirlpool ETl8CK manual Adjusting the refrigerator shelves, Removing crispers and crisper cover

Unplug the refrigerator first.

I, Reach behrnd control console to find bulb 2 Remove bulb

3 Replace with a 40-w&t appliance bulb

Moving the meat pan and cover...

The meat pan and cover can be removed for cleanina and moved to another shelf, if desired. Removethe meat pan first.

Removing:

1.Sltde the purr> ou’ to l:op

2.Lrtt the front of meat pan

3.Side pan ?he rest of the way out

4.TII: cover up at front

5 PUI! forward and out

Replacing:

1.F!t notches underneath cover over rear and center cross bars on shelf

2.Lower cover In place.

3.Replace meat pan In reverse order

Adjusting the refrigerator shelves...

1	Frrst, remove food	from	shelf	Guide	Stop+
2.	Slrde shelf straight	out to stop		Shelf	Sto-
3	Lift front
4.	Slide the rest of the	way	out

Replacing Shelf:

1. Fit back of shelf on top of aurdes wrth wire stoos on the bottom of gurdes.

2 Lrft front, slrde shelf In until It clears guide stops

I

Shelf Guide

Removing crispers and crisper cover.. .

Pull Out to Stop. Lift the Front Removing the Crispers:

1 Slide crisper strarght out to stop, Ikftfront, then slide the rest of the way out

2 Replace In the reverse order.

Removing	Cover:
1 Push up	glass Insert from bottom, then slrde	out
with both	hands
2 Lift front	of cover frame and remove cover	support
3 Loftout cover frame by pulling up and out

Replacing

Cover:

Remove

the

1

Fit back

of cover

into notch

supports

on walls

of

Glass

Insert,

refrigerator,

then

lower

front

Into

place

Lift the Frame Front,

2. Replace

cover support

with

the

long

tab

then

the

Back.

towards

the

front

Note: If the support

needs

Glass

is heavy.

adjustment.

turn

base

right to lower, or left to

raise

Be Careful.

3

Slide back

of glass insert into place,

then lower front

Removing and Adjusting the freezer shelf...

To remove shelf:

1.Lift front slightly

2.Lift back off supports.

3.Replace in reverse order.

To adjust shelf: Shelf support

I, Remove shelf

2.Remove supports by slrding upwards.

3.Replace supports on desired level,

4.Replace shelf

6