Using your refrigerator
REFRIGERATOR CONTROL
Setting the controls...
Controls forthe refrigerator and freezer are in the refrigerator. When the refrigerator is plugged in for the first time...
1.Set the REFRIGERA- TOR CONTROL to 3.
2.Set the FREEZER CONTROL to 6.
Give the refrigerator time to cool down com- pletely before adding food. (This may take sev-
eral hours.]
These settings should be about right for nor- mal household refrigerator usage.
The controls will be set about right when milk or juice is as cold as you like when ice cream is firm.
reach under the
Changing the control settings...
If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below.
l
l
l
Adjust the Refrigerator Control first.
Wait at least 24 hours between adjustments. Then adjust the Freezer Control if needed.
CONDITION: REASON:
RECOMMENDED CONTROL SETTINGS:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
QUESTIONS?
Door opened often
Large amount of food added Room temperature too warm
Door opened often
Large amount of food added Very cold room temperature (can’t cycle often enough)
Refrigerator
Freezer
Refrigerator3
FreezerA
call | your | If Refrigerator | Controls | not | set correctly | ||||
Section | is | for your | conditions | ||||||
service |
| TOO COLD |
|
|
|
|
| ||
assistance | If ICE isn’t | Heavy |
| ice | usage | ||||
telephone |
| ||||||||
MADE | FAST ENOUGH | Very | cold | room temperature | |||||
number |
| ||||||||
|
|
| [can’t | cycle |
| often enough) | |||
(paw | 16). |
|
|
| |||||
If BOTH SECTIONS | Door | opened | often | ||||||
|
| ||||||||
|
| are TOO WARM | Large | amount | of food added | ||||
|
|
|
| Very warm or very cold | |||||
|
|
|
| room | temperatures |
Refrigerator2
FreezerB
Refrigerator3
FreezerA
Refrigerator4
FreezerB
Power Saving Control...
The Power Saving Control on the Control Con- sole operates electric heaters around the door openings. These heaters help keep moisture from forming on the outside of the refrigerator,
1.Use the “CONSUMES LESSENERGY” setting when humidity is low.
2.Use the “REDUCESEXTERIOR MOISTURE” setting if moisture forms on the outside of the refrigerator.