Whirlpool ETl8SC Using your refrigerator, Setting the controls, Changing the control settings

Using your refrigerator

Retrigerotor	Control	/	Light Switch	Freezer Control
		Power Saving	Control

Setting the controls.. .

Controls for the refrigerator and freezer are In the refrigerator. When the refrigerator IS plugged In for the first time

1 Set the REFRIGERA- - TOR CONTROL to 3

2 Set the FREEZER CONTROL to B.

Give the refrigerator time to cool down com- pletely before adding food. (This may take sev-

eral hours.)

These settings should be about right for normal household refrigerator usage.

The controls will be set about right when milk or Juice IS as cold as you like and when ice cream ISfirm.

Changing the control settings.. .

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below.

l

l

l

Adjust the Refrigerator Control first.

Wait at least 24 hours between adjustments. Then adjust the Freezer Control, if needed.

		CONDITION:
		If Refrigerator
		Section is
		TOO WARM
		If Freezer
		Section IS
		TOO WARM
QUESTIONS?
...ca’l	your	If Refrigerator
COOL-LINE”		Section ,s
service		TOO COLD
assistance
		If ICE isn’t
telephone
		MADE FAST ENOUGH
number
(page	111.	If BOTH SECTIONS

are TOO WARM

									RECOMMENDED CONTROL
REASONS:									SETTINGS:
Door	opened				often				Refrigerator
Large	amount					of food		added	Freezer
Room temperature							too	warm
Door	opened				often				Refrigerator
Large	amount					of food		added	Freezer
Very	cold		rcom			temperature
(can’t	cycle			often			enough)
Controls not				set correctly					Refrigerator
for your		conditions							Freezer
Heavy		Ice	usage						Refrigerator
Very	cold		rmm			temperature			Freezer
[can’t	cycle			often			enough)
Door	opened				often				Refrigerator
Large	amount					of food		added	Freezer
Very warm o( very cold
room	temperatures

Power Saving Control.. .

The Power Saving Control on the Control Con- sole operates electric heaters around the door openings. These heaters help keep moisture from formIng on the outslde of the refrigerator

1Use the ‘CONSUMES LESS ENERGY” setting when humidity is low

2Use the “REDUCES EXTERIOR MOISTURE” setting only if moisture forms on the outside of the refrigerator

5