Adjusting the refrigerator shelves...
1First, remove food from shelf
2.Slide shelf straight out to stop
3 Lift front
4.Slrde the rest of the way out
Replacing Shelf:
1Frt back of shelf on top of guides with wire stops on the bottom of guides
2Lift front, slide shelf in untrl it clears guide stops
Removing the crisper, trivet and
crisper cover...
Removing crisper:
I. Slide crisper straight out to stop 2 Loftthe front.
3Slrde the rest of the way out.
4Replace in reverse order
Removing trivet:
I, Lift the trivet from the support brackets on the back wall.
2 Replace in reverse order
Removing cover:
1.Lift front, then lift back.
2.Pull up and out.
Replacing cover:
1 Fit notches on back of cover into supports on back wall of refrigerator.
2. Lower front into place
‘f-q-
Shelf Guide
I ‘I | Lift the Front, Then the Back. |
Pull out to stop.
Lift the Front and Pull Again.
Changing the light bulb.. .
WARNING: Before removing the light bulb, either unplug the refrigerator or disconnect
the electricity leading to the re- frigerator at the main power supply. Shock and injury can occur if elec- tricity remains connected.
1 Reach behind control console to find bulb
2 Remove bulb
3. Replace with a
Ice cube trays... | , , | 1,\ |
|
|
To remove ice:
1.Hold tray at both ends.
2.Slrghtly twist.
If cubes are not used, they may shrink. The moving cold oir starts a slow evaporation. The longer cubes are stored, the smaller they get.