REFRIGERATOR | POWER SAVER |
Refrigerator | Control | / | Light Switch | Freezer Control |
|
|
|
| |
|
| Power Saving | Control |
|
Setting the controls.. .
Controls for the refrrgerator and freezer are in the refrigerator. When the refngerator is plugged in for the first time..
1.Set the REFRIGERA- TOR CONTROL to 3.
2.Set the FREEZER CONTROL to B.
Give the refrigerator time to cool down com- pletely before adding food. (This may take sev-
These settings should be about right for normal household refrigerator usage.
The controls WIII be set about right when milk or juice is as cold as you like and when ice cream is firm.
Changing the control settings.. .
If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below,
l
l
l
Adjust the Refrigerator Control first.
Wait at least 24 hours between adjustments Then adjust the Freezer Control, if needed.
|
| CONDITION : | |
|
| If Refrigerator | |
|
| Section is | |
|
| TOO WARM | |
|
| If Freezer | |
|
| Section is | |
|
| TOO WARM | |
QUESTIONS? | |||
.,,call | your If Refrigerator | ||
service |
| TOO COLD | |
assistance | |||
If ICE isn’t | |||
telephone | |||
MADE FAST ENOUGH | |||
number |
| ||
|
| ||
(page | 111. | If BOTH SECTIONS | |
|
| ||
are TOO WARM
REASONS:
Door opened often
Large amount of food added Room temperature too warm
Door opened often
Large amount of food added Very cold room temperature (can’t cycle often enough]
Controls not set correctly for Your conditions
Heavy Ice usage
Very cold room temperature [can’t cycle often enough)
Door opened often
Large amount of food added Very warm OTvery cold
RECOMMENDED CONTROL
SETTINGS:--
Refrigerator
Freezer:
Refrigerator3
FreezerA
Refrigerator2
FreezerB
Refrigerator3
FreezerA
Refrrgerator4
FreezerB
Power Saving Control.. .
The Power Saving Control on the Control Con- sole operates electric heaters around the door openrngs. These heaters help keep moisture from forming on the outside of the refrigerator.
.CONS”MLS,tib,kNIRG”. RtWCrSellt1110”I*oosru~E.
4m
I.Use the “CONSUMES LESS ENERGY” setting when humidity is low
2.Use the “REDUCES EXTERIOR MOISTURE” setting only if moisture forms on the outside of the refrigerator.
5
