Whirlpool ETl8TK manual Adjusting the refrigerator, Removing and Adjusting the freezer shelf

Changing the light bulb.. .

Unplug the refrigerator first.

I, Reach behind control console to find bulb.

2.Remove bulb.

3.Replace with a 40-watt appliance bulb.

The meat pan and cover can be removed for cleaning and moved to another shelf, if desired. Remove the meat pan first.

Removing:

1. Slide the pan out to stop.

2. Lift the front of meat pan.

3. Slide pan the rest of the way out.

4. Tilt cover up at front.

5. Pull forward and out.

Replacing:

1. Fit notches underneath cover over rear and center cross bars on shelf.

2. Lower cover in place.

3. Replace meat pan in reverse order.

Adjusting the refrigerator

I.First, remove food from shelf.

2. Slide shelf straight out to stop.

3. Lift front. Shelf Stop -

4.Slide the rest of the way out

Replacing	Shell:		1
1. Frt back of shelf on top of gutdes		with	wire stops	1
on the bottom of guides.
2 Lift front,	slide shelf in until It clears	guide	stops.	Shell 61
Removing crispers and crisper cover.. .
Removing	me Crispers:			A
			Lift the Front, Then the ---Back ...

I, Slide crisper straight out to stop, lift front, then slide the rest of the way out,

2.Replace in the reverse order.

Removing Cover:

I, Lift front and remove the cover support

2.Lift out cover by pulling up and out

Replacing Cover:

1.Fit back of cover into notch supports on walls of refrigerator, then lower front into place.

2.Replace cover support with the long tab towards the front. Note: If support needs adjustment, turn base right to lower, or left to raise.

Removing and Adjusting the freezer shelf...

To remove shelf:

I.	Lift front	slightly.
2.	Lift back	off supports.
3.	Replace	in reverse order

To adjust	shelf:	Shett Support
I, Remove	shelf.

2.Remove supports by sliding upwards

3.Replace supports on desired level.

4.Replace shelf.

6