Whirlpool ETL8VK, ETl8XK manual Adjusting the refrigerator shelves, Moving the meat pan and cover

Changing the light bulb...

WARNING: Before removing the light bulb, either unplug the refrigerator or disconnect

the electricity leading to the re- frigerator at the main power supply. Shock and injury could occur.

Adjusting the refrigerator shelves...

Shelves can be adjusted to match the way you use your refrigerator.

If your	model	hos	,i
gloss	shelves	Glass
shelves	are	heovv
Be careful			II I

2. Remove bulb

3 Replace with a 40.watt appliance bulb.

To remove shelves:

1.Tilt up at front.

2.Lift up at back

3.Pull shelf strarght out.

To replace:

1 Guide the rear hooks Into the slots in the shelf supports.

2.Tilt up front of shelf until hooks drop into slot. Lower front of shelf to level position.

Moving the meat pan and cover...

Model ETlBXK

The meat pan can be taken out and moved the same way as the shelves. Remove the meat pan frrst.

Model EMBVK
Pull Out to	Stop. Lifl the	Glass is heavy.
Front and	Pull Again.	Be Careful.

Removing the Meat Pan:

I.Slide the meat pan out to stop

2 Lrft the front of meat pan.

3 Slrde pan the rest of the way out.

4 Tilt cover up at front

5. Lift up at back.

6. Pull straight out.

Removing the cover:

1 Guide the rear hooks into the slots in the shelf supports.

2Tilt up front of cover until rear hooks drop into slots. Lower front of cover to level posrtion

3Replace meat pan in reverse order.

Removing the Meat Pan:

1.Slide the meat pan out to stop.

2.Lift the front.

3.Slide pan the rest of the way out

4.Replace in reverse order

Removing the cover:

I, Push up glass insert from bottom, then slide out with both hands.

Cover Frame

Frame support

2.Lift cover frame out of frame support

3.Tilt front of frame support up, lift at back, and pull support straight out.

4.Replace in reverse order

Removing crispers and crisper cover.. .

’ill I Dllll nII* *A Stop. Lift the Front

wEI’‘7:;

=fP-h\‘r,	-ii
	h

	Lift the Frame Front,
	then	the Back.
	Glass	Is heavy.
6	Be Careful.

Removing the Crispers:

1, Slide crisper straight out to stop, lift front, then slide

the rest of, the		way	out.
2. Replace In the reverse order
Removing	Cover:		6
1 Push up-glass		insert	from bottom, then slide oul
with both	hands.

2.Lift front of cover frame and remove cover support

3.Lift out cover frame by pulling up and out. Rep,acing Cover

I, Fit back of cove/into notch supports on walls of refrigerator, then lower front into place.

2.Replace cover support with the long tab towards the front. Note: If the support needs adjustment, turn base right to raise, or left to lower.

3.Slide back of glass insert into place, then lower front.