Whirlpool ETZOGMET20GK, ETl8HM, ETi8HK, EM8GK manual Using Your Refrigerator, Yosnv

Using Your Refrigerator

Continued

EXTERIOR MOISTURE CONTROL

l OFF 0 ON b

yosnv

GM and GK models:

Glass shelves are heavy. Be careful.

Pull out to the stop, lift the

front and pull again.

Exrerlor. klo.is!tireContr@I

The Exterior Mois.ture’Control on tne Control Console operates electric heaters around the door openings, These heaters help keep morsture from forming on the outside of the refrigerator.

1.Use the OFF setting when humidity is low.

2.Use the ON setting if moisture forms on the outside of Ihe refrigerator.

Adjusting the refrigerator shelves

Shelves can be adjusted to match the way you use your refngerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.

To remove shelves:

1.Remove items from shelf.

2.Tilt up at front.

3.Lift up at back.

4.Pull shelf straight out.

To replace shelves:

1.Gurde the rear hooks into the slots in the shelf supports.

2.Tilt up front of shelf until hooks drop Into slot. Lower front of shelf to level positron.

NOTE: The above Instructions apply to all models (GM and GK models with glass shelves and NK, HM and HK models with DURAWHITE” wrre shelves).

Removing the freezer shelf

Moving the meat drawer and cover

To remove the meat drawer:

1.Slide the meat drawer out to the stop.

2.Loft the rront.

3.Slide the drawer the rest of the way out.

4.Replace in reverse order.

To remove the cover:

1.Tilt front of cover up, lift at back, and pul strarght out.

2.Replace in reverse order.