Whirlpool EM8GK, ETZOGMET20GK, ETl8HM, ETi8HK manual Freezer, Reason, Settings

CONDITION:

If Refrigerator Section is

TOO WARM

If Freezer Section is

TOO WARM

If Refrigerator Section is

TOO COLD

“&~t~l~~l~~~~:~llei;K~E~l~HM:~

and ET18HK

Controls for the refrigerator and freezer are in the refrigerator. When the refrigerator is plugged in for the first time:

1. Se! the Refrigerator Control lo 3.

FREEZER					2. Set the Freezer		Control	to B.
4 WARMER 0 COLDER t	I				Give the refrigerator		time to cool down completely
					before adding food, (This may take several hours.)
					These settings should be about right for normal
					household	refrigerator usage.
					The controls will be set about right when milk
					or juice is as cold as you like and when ice cream
					is firm.
					If you need to adjust temperatures in refrigerator
					or lreezer, use the settings listed in the chart below.
					If you have any questions, call our Consumer
					Assistance Cenler number. (See page 18.)
					l Adjust the Refrigerator Control first.
					l Wait at least 24 hours between adjustments.
					l Then adiust the Freezer Control if needed.
						RECOMMENDED
REASON:						CONTROL		SETTINGS:
Door	opened			often		Refrigerator		4
Large	amount			of food added		Freezer		C
Room	temperature				loo warm
Door	opened			often		Refrigerator		3
Large	amount			of food added		Freezer		A
Very cold room temperature
(can’t	cycle		often		enough)
Controls		not	set correctly			Refrigerator		2
for your		conditions				Freezer		B

If ICE isn’t

MADE FAST ENOUGH

If BOTH SECTIONS are TOO WARM

Heavy Ice usage

Very cold room temperature (can’t cycle oHen enough)

Door opened often

Large amount of food added Very warm or very cold room temperatures

Refrigerator 3

Freezer A

Refrigerator 4

Freezer B

7