Raise signal arm to stop Ice.
Lower slgnal arm to start It.
AutotiatWce in&k&
It you have Ihe automatrc Ice maker accessory, or
IIyou plan IO add one later (Part No
l The ON/OFF lever IS a wrre srgnal arm. Down...for making Ice aulomatrcally.
NOTE: Do not turn Ice maker on until rt IS connected to the waler supply Instructions for ice maker water supply
lThe dial or lever on the side of the ice maker changes the size of the cubes.
l Shake the brn occasionally lo keep cubes sepa- rated and to obtain Increased storage capacity.
lIt IS normal for ice crescents to be attached by a corner. They will break apart easily.
lYou WIII hear water runnrng when Ice maker IS working. You’ll hear Ice fallrng Into the brn. Don’t let these sounds bother you.
l The ice maker will not operate unlrl the freezer IS cold enough to make ice. Thus can lake overnrghl.
l Because of new plumbing conneclrons. the frrst Ice may be drscolored or off
lIf ice is not being made last enough and more rce IS needed, turn the Relngeralor Control toward a higher number. Wart a day and, 11neL~essary. turn the Freezer Control toward A.
lII you remove the Ice brn. rarse the srgnal arm to shul off the Ice maker. When you return the brn. push 11all the way rri and lower the arm lo the ON position.
lIf cubes are slored too long, they may develop an
l Good water quality is Important for good Ice quallty. It IS not recommended that the ice maker be connected to a softened water supply. Water softener chemicals such as salt from a mallunc- lronrng softener can damage the Ice maker mold and lead to poor quality Ice. If a softened water supply cannot be avoided. then if IS Important that the water softener be well maintained and operatrng properly.
11