Using your freezer
Setting the temperature control...
To start, turn control to the middle of the dial This setting IS desrgned to maintain the temperature at or near 0°F (~ 17.8 “C)under normal operating conditions.
Adjusting the temperature control...
1 Turn control to higher number for colder temper- atures
2 Turn to lower number for less cold temperatures
Cooling freezer first...
1 Allow freezer to cool 6 to 8 hours before filling with frozen food.
2 Let It cool overnight before addng large amount of unfrozen food.
Note: When freezer ISfirst started, the compressor will run constantly untrl the cabinet IS cooled It may take up to 6 to 0 hours or longer, depending on room temperature and the number of times the freezer door IS opened
After the cabinet IS cooled, the compressor WI// turn ON and OFF as needed to keep the freezer at the proper temperature
The Power Saving Control...
operates electric heaters These heaters help prey :ent moisture froT forming on the outside of the freezer when burr duty IS high
1kJse the OFF se++lng &h/her h,Jrrictty IS low
iJSP the OPJ
Changing the light bulb...
r/
WARNING: To avoid possible shocks, first unplug
freezer or turn off electricity leading to freezer at the main power supply.
1 Remove the light shield from the side of the control panel. Depress the back of the shreld to release the tabs, then pull away.
2 Replace bulb with a 40.watt appltance bulb
3 Replace the light shield Insert the shield tabs in the slots, then press the shield to snap into place
Light Shield