Whirlpool EV190N manual Using your freezer

Using your freezer

e....- y..-. . ,., ~,I, pi.- * ,. .Cb

Setting the temperature control...

To start, turn control to the middle of the dial. This setting is designed to maintain the temperature at or near 0°F [ ~ 17.8 “C]under normal operating condrtions.

Adjusting the temperature control...

I. Turn control to higher number for colder temper- atures.

2 Turn to lower number for less cold temperatures.

Cooling freezer first...

1 Allow freezer to cool 6 to 8 hours before filling with frozen food.

2.Let it cool overnight before adding large amount of unfrozen food.

Note: When freezer is first started, the compressor WIII run constantly untrl the cabinet is cooled. It may take up to 6 to 8 hours or longer, depending on room temperature and the number of times the freezer door is opened

After the cabrnet is cooled, the compressor will turn ON and OFF as needed to keep the freezer at the proper temperature.

The Power Saving Control...

operates electric heaters. These heaters help pre- vent moisture from forming on the outside of the freezer when humidity is high.

I, Use the OFF setting to save energy when humidity is low.

2.Use the ON setting only if moisture forms on the out- side of the freezer.

Adjusting the basket shelf...

To remove basket shelf:

I. Remove food from basket

2. Slide basket straight out to stop.

3. Lift front

4. Slide the rest of the way out.

To replace basket shelf:

1. Fit back of basket shelf on top bottom of guides.

2. Lift front, then slide the basket guide stops.

Adjusting the freezer shelves... _,

To remove shelf:

I. Remove food from shelf

2 Slide shelf straight out to stop.

3.Lift front

4.Slide the rest of the way out To replace shelf:

I. Fit back of shelf on top of guides with wire stabs on
bottom of guides.		+===	Shelf Guide
2. Lift front, then slide shelf untrl tt	clears the guide

stops.