Changing the light bulb...
WARNING: To avoid possible electrical shock, first unplug freezer or turn off elec- tricity leading to freezer at the main power supply.
I. Remove the light shield from the side of the control panel. Depress the back of the shield to release the tabs, then pull away.
2 Replace bulb with a
3.Replace the light shield Insert the shield tabs in the slots, then press the shield to snap into place.
4.Plug in power cord or switch on electricity
Removing the freezer basket.. .
For proper air movement, keep the freezer basket in place when the freezer is operating.
To remove the basket:
lSlide out to the stop.
lLift the front to clear the stop. l Slide out the rest of the way.
To replace | the | basket: |
|
l Place basket on the slides. |
| ||
l Make sure the wire stops |
| ||
clear the front of theslides. |
| ||
l Slide basket | in. |
| |
_ sr.5. |
| .,_iWl..,, _ .: .l,cl.: | ~ ,,,.&,., a,. ,- |
The key eject lock...
can help reduce the hazard of child entrapment.
. .
To lock or unlock the freezer you must hold the key in the lock while turning The lock is spring loaded so the key cannot be left in the lock
If the key is lost, contact your WHIRLPOOL
dealer for a replacement Always grve the com- plete model and serial number of your freezer
when requesting a replacement key
The signal light...
automatically warns of any unexpected power failure.
Signal light
/
l
l
l
|
|
|
| To replace | burned | out signal light: | |
If the signal | light | is not glowing, immediately | check: | I. Unplug power cord from outlet. | |||
2. Open the freezer door | |||||||
for power | interruption, |
| |||||
| 3. Unplug burned out light and replace with one of | ||||||
for an unplugged | power cord, |
| |||||
| same wattage | and size. Signal light can be or- | |||||
for a burned out signal light. |
| ||||||
|
|
|
|
dered from vour WHIRLPOOL dealer, Part No.
6