The Key Eject lock... | Changing | light Bulb... |
can help reduce the hazard of child entrapment.
To lock or unlock the freezer you must hold the key in the lock while turning. The lock is spring loaded so the key cannot be left in the lock.
lfthe key is lost, contact your WHIRLPOOL dealer
for a replacement. Always give the complete model and serial number of your freezer when
requesting a replacement key.
1.Unplug power cord.
2.Remove light shield by pulling away from the side wall.
3.Replace bulb with 40 watt appliance bulb.
4.To replace shield, insert tabs into slots in wall and press.
Removing the Base Grille.. .
Lift up the
l Open the door.
l Lift up on two tabs showing through grille. l Swing the top of the grille forward.
l
l
l
Lift grille off bottom supports
Swing out; lift up
Replace in reverse order.
Do not remove Tech Sheet fastened behind the grille.
Bottom Basket...
To remove:
l Lift up, then pull out.
To replace:
l Insert into rear slides.
0 Lower into place.
l Push basket into freezer.
4
