Whirlpool FEP310KN1 Troubleshooting, Nothing will operate, Oven temperature too high or too low

Models: FEP310KN1

1 16
Download 16 pages 12.25 Kb
Page 14
Image 14
TROUBLESHOOTING

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Nothing will operate

 

Oven temperature too high or too low

Is the power supply cord unplugged? Plug into a grounded outlet.

Has a household fuse blown, or has a circuit breaker tripped?

Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

Cooktop will not operate

Is the control knob set correctly? Push in knob before turning to a setting.

On ceramic glass models, is the “Cooktop Lockout” set? See “Cooktop Lockout” section.

On coil element models, is the element inserted properly? See “Coil Elements and Burner Bowls” section.

Excessive heat around cookware on cooktop

Is the cookware the proper size?

Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than 1" (2.5 cm) outside the cooking area.

Hot Surface indicator light stays on

Does the Hot Surface indicator light stay on after control knob(s) have been turned off?

See “Cooktop Controls” section.

Cooktop cooking results not what expected

Is the proper cookware being used? See “Cookware” section.

Is the control knob set to the proper heat level? See “Cooktop Controls” section.

Is the appliance level?

Level the appliance. See the Installation Instructions.

On coil element models, is the element inserted properly? See “Coil Elements and Burner Bowls” section.

Oven will not operate

On some models, is the electronic clock/timer set correctly?

See “Electronic Clock/Timer” section.

On some models, has the oven selector been set to a BAKE or BROIL function?

See “Baking and Roasting” or “Broiling” sections.

Does the oven temperature calibration need adjustment? See “Oven Temperature Control” section.

Oven indicator lights flash

Do the OVEN HEATING indicator lights flash? See “Assistance or Service” section.

Self-Cleaning cycle will not operate

Is the oven door open?

Close the oven door all the way.

Has the function been entered? See “Self-Cleaning Cycle” section.

On some models, has a delay start Self-Clean cycle been set?

See “Self-Cleaning Cycle” section.

Oven cooking results not what expected

Is the appliance level?

Level the appliance. See the Installation Instructions.

Is the proper temperature set?

Double-check the recipe in a reliable cookbook.

Is the proper oven temperature calibration set? See “Oven Temperature Control” section.

Was the oven preheated?

See “Baking and Roasting” section.

Is the proper bakeware being used? See “Bakeware” section.

Are the racks positioned properly?

See “Positioning Racks and Bakeware” section.

Is there proper air circulation around bakeware? See “Positioning Racks and Bakeware” section.

Is the batter evenly distributed in the pan? Check to make sure batter is level in the pan.

Is the proper length of time being used? Adjust cooking time.

Has the oven door been opened while cooking?

Oven peeking releases oven heat and can result in longer cooking times.

Are baked items too brown on the bottom? Move rack to higher position in the oven.

Are pie crust edges browning early?

Use aluminum foil to cover the edge of the crust and/or reduce baking temperature.

14

Page 14
Image 14
Whirlpool FEP310KN1 Troubleshooting, Nothing will operate, Oven temperature too high or too low, Cooktop will not operate