CARING FOR YOUR RANGE
REMOVING THE OVEN DOOR (CONT.)
2.Hold oven door so that the top edge of each hinge hanger is horizontal. Insert hinge hangers into the front frame hinge slots.
3.Rotate top of door toward range. Slide hinge hangers down onto front frame support pins.
NOTE: Make sure the hinge hangers are fully seated and engaged on the support pins.
4.Insert the door stop clip with the angular surface at the top of the frame hinge slot, then push in the bottom of the clip until flanges are flush with the front frame.
5.Open the door completely and remove the door removal pins. Save door removal pins for future use.
6.Close the door.
Door stop | Range |
clip |
|
Door removal | Hinge |
hanger | |
pin hole |
|
| Support pins |
| Front frame |
| hinge slot |
| Angular |
| surface of |
Door removal | door stop |
clip | |
pin hole |
|
35
