Whirlpool FEP310G, FEP330G, FEP320G warranty Setting the Controls Model FES330G

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS (MODEL FES330G)

1. Set the oven control knob to CLEAN. PUSH AND TURN

YOU SEE

The door will lock itself within 6 seconds. If the door has a problem locking, it will try to lock itself for 1 minute. If the door fails to lock, the Self- Cleaning cycle will cancel. An error code will be displayed.

NOTE: Do not attempt to open the door while in the locking mode.

		L	E
IL		C	AN	5
O				0
R					0
B
					4
					5
					0
						4
							0
F							0
F						5	3
O					0
M
R
A				0	3
W
	0		052	0
	02

OVEN ON light goes on. DOOR LOCKED/ CLEANING light flashes until you close door, then is solid. HEATING light goes on when oven starts heating.

2.Set the cleaning time (optional).

Press the “up” (s) or “down” (t) pad(s) to select a clean time between 2 hours, 30 minutes and 4 hours, 30 minutes.

NOTE: The Self-Cleaning cycle will automatically set a 31/2 hour cycle unless a different time is selected.

3.During the last 30 minutes of the Self-Cleaning cycle the oven will start to cool down.

Once the oven goes below the locked temperature:

4. Turn the oven control knob to OFF. TURN

					F	F
				O
			M
			R
			A
	0	0	W					B
								O
2								R
								I
0								L
5								C
2
								L
0								E
								A
0								N
3
			0					5
							0
			5				0
			3				4
					004	5
						0

5.After the oven is cool, wipe off any residue or ash with a damp cloth or sponge.

If needed, touch up spots with a mild abrasive cleanser or cleaning sponge.

PRESS

YOU SEE

OVEN ON and DOOR LOCKED/CLEANING lights are on. HEATING light goes off and COOL appears in display.

YOU SEE

OVEN ON light flashes.

DOOR LOCKED/ CLEANING light goes out when door unlocks.

YOU SEE

OVEN ON light goes out and time of day appears in display.

28