Audible signals
Audible signals are available to guide you when setting and using your range. A beep will sound each time you touch a command button. Three beeps signal the end of the electronic Timer function.
To remove audible signals:
l Push and hold the STOP TIME button until you hear two beeps.
l Audible signals are now removed.
To replace audible signals:
l Push and hold the STOP TIME button until you hear one beep.
l Audible signals are now replaced.
Setting the clock
1.Push the Clock button. TIME will show in the display.
2.Turn the Time/Temp Set Knob until the correct time shows in the display.
3.Push the Cancel button to start clock opera- tion. The clock will start 30 seconds after setting the time.
TlMElTEMP
SET
I CANCEL
@B
12
