Manuals / Whirlpool / Kitchen Appliance / Refrigerator

Whirlpool W10417010A Replace Right-Hand Refrigerator Door, Replace Left-Hand Refrigerator Door

Models: W10417010A French Door Bottom Mount Refrrigerator

1 128
Download 128 pages 9.42 Kb
Page 8
Image 8

INSTALLATION INSTRUCTIONS

Style 2 - Firmly pull up on the clasp. Then, pull the tubing out of the fitting.

NOTE: The water dispenser tubing remains attached to the left-hand refrigerator door.

3.Disconnect the wiring plug located on top of the door hinge.

■Grasp each side of the wiring plug. With your left thumb, press down to release the catch and pull the sections of the plug apart.

NOTE: Do not remove the green, ground wire. It should remain attached to the door hinge.

4.Using the ³⁄₁₆" hex key wrench, remove the two internal hex head screws from the top hinge, and set aside.

NOTES:

■Provide additional support for the refrigerator door while the hinges are being removed. Do not depend on the door gasket magnets to hold the door in place while you are working.

■Do not remove the two locator screws. These screws will help you align the hinge when you replace the door.

AB

5.Lift the refrigerator door from the bottom hinge pin. The top hinge will come away with the door.

NOTE: It may not be necessary to remove the bottom hinges and brake feet assemblies to move the refrigerator through a doorway.

■Only if necessary, use a driver with a #2 square bit tip to remove the bottom hinges and a ³⁄₈" nut driver to remove the brake feet screws.

Replace Right-Hand Refrigerator Door

1.Set the right-hand door onto the bottom hinge pin.

2.Insert the top hinge pin into the open hole in the top of the refrigerator door.

3.Using the two ³⁄₁₆" internal hex head screws, fasten the hinge to the cabinet. Do not tighten the screws completely.

Replace Left-Hand Refrigerator Door

IMPORTANT: Do not intertwine the water tubing and wiring bundles when reconnecting them.

1.Set the left-hand door onto the bottom hinge pin.

2.Using the two ³⁄₁₆" internal hex head screws, fasten the hinge to the cabinet. Do not tighten the screws completely.

3.Reconnect the water dispenser tubing.

Style 1 - Insert the tubing into the fitting until it stops and the outer ring is touching the face of fitting.

Style 2 - Insert the tubing firmly into the fitting until it stops. Close the clasp around the tubing. The clasp snaps into place between the fitting and the collar.

4.Reconnect the electrical wiring.

■ Push together the two sections of the wiring plug.

Final Steps

1.Completely tighten the four internal hex head screws (two on the right-hand door hinge and two on the left-hand door hinge).

2.Replace both top hinge covers.

C

A. ³⁄₁₆" Internal hex head screws

C. Locator screws (do not

B. Ground wire (do not remove)

remove)

8

Page 7 Page 9
Page 8
Image 8
Whirlpool W10417010A manual Replace Right-Hand Refrigerator Door, Replace Left-Hand Refrigerator Door, Final Steps
Page 7 Page 9

W10417010A, French Door Bottom Mount Refrrigerator specifications

The Whirlpool French Door Bottom Mount Refrigerator, model W10417010A, is designed to meet the needs of modern kitchens while providing maximum convenience and efficiency. This stylish refrigerator combines sleek aesthetics with advanced technologies, making it an indispensable appliance in any household.

One of the standout features of the W10417010A is its French door design, which offers easy access to fresh foods stored in the refrigerator compartment. The upper section features two spacious doors that open wide, providing a clear view of all the items inside. This layout not only maximizes storage space but also allows for organized shelving, making it simple to find what you need. Below, the freezer is conveniently located in a pull-out drawer, further enhancing accessibility.

In terms of storage capacity, this refrigerator is designed to accommodate a variety of items, from large bottles to wide platters. The adjustable shelves offer flexibility, allowing users to customize the interior to fit their organizational needs. Additionally, gallon door bins provide ample space for storing beverages and condiments, keeping essential items within easy reach.

The W10417010A incorporates cutting-edge cooling technologies to maintain optimal food freshness. The temperature management system ensures that the refrigerator and freezer sections maintain consistent temperatures, reducing the risk of temperature fluctuations that can spoil food. Additionally, the humidity-controlled crisper drawers help keep produce fresher for longer by maintaining an ideal environment for fruits and vegetables.

Energy efficiency is also a key characteristic of this model. The Whirlpool French Door Bottom Mount Refrigerator is ENERGY STAR certified, meaning it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This certification not only helps reduce energy costs but also contributes to environmental sustainability.

Another highlight is the advanced water filtration system. The refrigerator is equipped with an easy-to-change filter that removes contaminants from water and ice, ensuring that users always have access to clean, great-tasting water. The convenient ice maker in the freezer adds to the overall functionality, providing a steady supply of ice for drinks and gatherings.

Overall, the Whirlpool French Door Bottom Mount Refrigerator W10417010A merges innovative technology with user-friendly features, making it a formidable choice for those seeking style and functionality in their kitchen appliances. Whether you're storing everyday groceries or hosting a dinner party, this refrigerator is designed to adapt to your lifestyle while ensuring your food stays fresh and organized.