Whirlpool GT1SHTXMT04, GC3PHEXNB01 Accessories, The water dispenser will not operate properly

Models: ET1FHTXMQ04 ET9FHTXMT03 GC3CHAXNT00 GC3CHAXNB00 GC3CHAXNQ00 GC3CHAXNS00 GC3PHEXNT02 GC5SHEXNB00 GC3PHEXNS00 GC3PHEXNS02 GC3PHEXNQ02 GC3PHEXNB02 GC3PHEXNT03 GC5SHEXNB03 GC3PHEXNQ01 GC3PHEXNT01 GC5SHEXNQ00 GC3PHEXNQ03 GC3PHEXNB03 GC3PHEXNQ00 GC3PHEXNS03 GC3PHEXNS01 GC3PHEXNT00 GT2MHTXRS01 GT1SHTXMT04 GT2MHTXRQ01 GT2MHTXRT01 GT1SHTXMB04 GT1SHTXMQ04 GC3SHEXNQ02 GC5CHAXNQ00 GC5CHAXNB00 GC3SHEXNS02 GC3SHEXNB02 GC3SHEXNT02 GC3PHEXNB00 GC3PHEXNB01

1 32
Download 32 pages 11.31 Kb
Page 12
Image 12
The water dispenser will not operate properly

Odor transfer from food? Use airtight, moisture proof packaging to store food.

Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

Water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing. Flush the water system before using a new water filter. Replace water filter when indicated. See “Water Filtration System.”

The water dispenser will not operate properly

Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

Kink in the water source line? Straighten the water source line.

New installation? Flush and fill the water system. See “Water Dispenser.”

Is the water pressure at least 30 psi? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

Water filter installed on the refrigerator? Remove filter and operate dispenser. If water flow increases, the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

Water is dripping from the dispenser

NOTE: One or two drops of water after dispensing is normal.

Glass not being held under the dispenser long enough? Hold the glass under the dispenser 2 to 3 seconds after releasing the dispenser lever.

New installation? Flush the water system. See “Water Dispenser.”

Recently changed water filter? Flush the water system. See “Water Dispenser.”

Water from the dispenser is warm

NOTE: Water from the dispenser is only chilled to 50°F (10°C).

New installation? Allow 24 hours after installation for the water supply to cool completely.

Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

ACCESSORIES

To order stainless steel cleaner or replacement filters, call

1-800-442-9991and ask for the part number listed below or contact your authorized Whirlpool dealer. In Canada, call 1-800-807-6777.

Stainless Steel Cleaner & Polish:

Order Part #4396095

In Canada, Order Part #31462B

Replacement Filter:

Order Part #4396701 (L200V / NL120V / NLC120V)

12

Page 12
Image 12
Whirlpool GT1SHTXMT04 Accessories, The water dispenser will not operate properly, Water is dripping from the dispenser