Whirlpool GEW9200LQ0 Dryer will not run, Unusual sounds, Lint on load, Items shrinking, Odors

Models: GEW9200LQ0

1 28
Download 28 pages 47.73 Kb
Page 25
Image 25
Dryer will not run

Dryer will not run

Check the following:

Is the power cord plugged in?

Has a fuse blown, or has circuit breaker tripped? Was a regular fuse used? Use a time-delay fuse.

Is the dryer door firmly closed? If not, the time display will blink.

Was HOLD TO START firmly pressed and held for at least 1 second?

Is a cycle selected?

Unusual sounds

Has the dryer had a period of non-use?

If the dryer hasn’t been used for a while, there may be a thumping sound during the first few minutes of operation.

Lint on load

Is the lint screen clogged?

Clean lint screen. Check for air movement.

Is load properly sorted?

Sort lint givers (towels, chenille) from lint takers (corduroy, synthetics). Also sort by color.

Is the load too big or too heavy?

Dry smaller loads so lint can be carried to the lint screen.

Was the load overdried?

Use correct dryer settings for load type (see “Cycles”). Overdrying can cause lint-attracting static electricity.

Was paper or tissue left in pockets?

Is pilling being mistaken for lint?

Pilling (surface fuzz) is caused by normal wear and laundering.

Stains on load or color change

Was dryer fabric softener properly used?

Add dryer fabric softener sheets at the beginning of the cycle when the load is cold. Do not add fabric softener sheets to a warm load.

Were items soiled when placed in the dryer? Items should be clean before being dried.

Were items properly sorted?

Sort light colors from dark colors. Sort colorfast items from noncolorfast items.

Items shrinking

Was the dryer overloaded?

Dry smaller loads that can tumble freely.

Did the load overdry?

Check the manufacturer’s care label. Match dryer setting to load type (see “Cycles”).

Loads are wrinkled

Was load removed from dryer at the end of the cycle?

Was dryer overloaded?

Dry smaller loads that can tumble freely.

Did load overdry?

Check the manufacturer’s care label. Match dryer setting to load type (see “Cycles”).

Odors

Have you recently been painting, staining or varnishing in the area where your dryer is located?

If so, ventilate the area. When the odors or fumes are gone from the area, re-wash and dry the clothing.

Is the dryer being used for the first time?

The new electric heating element may have an odor. The odor will be gone after the first cycle.

Garment damage

Check the following:

Were zippers, snaps, and hooks left open?

Were strings and sashes tied to prevent tangling? Were care label instructions followed?

Were items damaged before drying?

25

Page 25
Image 25
Whirlpool GEW9200LQ0 Dryer will not run, Unusual sounds, Lint on load, Stains on load or color change, Items shrinking