|
|
|
| Troubleshooting | |
|
|
|
|
|
|
PROBLEM | PROBABLE CAUSE | CORRECTIVE ACTION | |||
Rider Will Not | 1. Drive disc worn or damaged. | 1. | Replace drive disc. Contact authorized dealer. |
| |
Move Or Loss |
|
|
|
| |
2. Rubber drive disc is not tracking properly on | 2. | Adjust rubber drive disc. Contact authorized dealer. | |||
of Traction | drive disc. |
|
|
| |
(Manual Drive |
|
|
|
|
|
Models) | 3. Tapered axle bolt and nut missing. | 3. | Contact authorized dealer. |
| |
| 4. | Axle bearing seized. | 4. | Contact authorized dealer. |
|
| 5. | Insufficient lubrication in chain case or | 5. | Contact authorized dealer. |
|
| transmission/differential. |
|
|
| |
Rider Will Not | 1. Drive belt slipping or broken. | 1. | Contact authorized dealer. |
| |
Move Or Loss |
|
|
|
| |
2. Transmission problem. | 2. | Contact authorized dealer. | |||
of Traction |
|
|
|
|
|
(Hydro Drive |
|
|
|
|
|
Models) |
|
|
|
|
|
Blade(s) Not | 1. Blade control in the OFF position. | 1. | Move blade control to the ON position. |
| |
Cutting |
|
|
|
| |
2. Mower belt slipping. | 2. | Adjust or replace mower belt. Contact authorized | |||
|
|
| dealer. |
| |
| 3. | Cutting blade is dull, worn or damaged. | 3. | Sharpen or replace cutting blade. |
|
Cutting Grass | 1. Uneven tire pressure. | 1. | Check tire pressure and adjust as needed. |
| |
Improperly |
|
|
|
|
|
| 2. | Cutting height too low or high. | 2. | Adjust cutting height. |
|
| 3. | Engine speed too slow. | 3. | Move engine speed control to FAST position. |
|
| 4. | Forward ground speed too fast. | 4. | Adjust unit to a slower ground speed. |
|
| 5. | Terraced cut, side to side. | 5. | Adjust side to side leveling. |
|
| 6. | Excessive deck pitch, front to rear. | 6. | Adjust front to rear leveling. |
|
| 7. | Cutting blade(s) dull or damaged. | 7. | Sharpen cutting edges or replace blade(s). |
|
| 8. | Mower belt slipping. | 8. | Adjust tension or replace mower belt. Contact |
|
|
|
| authorized dealer. |
| |
Poor Grass | 1. Engine speed too slow. | 1. | Move engine speed control to FAST position. |
| |
Discharge |
|
|
|
| |
2. Forward ground speed too fast. | 2. | Adjust unit to a slower ground speed. | |||
| 3. | Grass is wet. | 3. | Mow when grass is dry. |
|
| 4. | Excessively dull, worn or damaged blade(s). | 4. | Service mower blade. |
|
| 5. | Build up of grass clippings and debris under | 5. | Clean the underside of deck. |
|
| deck. |
|
|
| |
| 6. | Improper blade installed on deck. | 6. | Install proper blades. |
|
Oil Leaking | 1. Leaking chain case or differential plugs. | 1. | Verify plugs are not cracked & are in good shape. |
| |
|
|
| Check gaskets. |
| |
| 2. | Leaking engine block. | 2. | Contact authorized dealer. |
|
en | 35 |
