Operation
! | WARNING | ! |
DO NOT leave the machine with the engine running. STOP Blade. STOP engine. Shift to neutral and engage parking brake. Remove key.
How To Stop The Engine, Transmission And Mower Blade
Engine
1.Stop the engine by turning the ignition key (A, Figure 12) to the OFF position.
2.Remove the key.
A |
Figure 14: Ground speed pedals (hydro drive models)
A
Mower Blade
|
|
|
|
| 1. Stop the mower blade by moving the blade control (A, | |||
|
|
|
|
|
| Figure 15) to the OFF position. |
| |
|
|
|
|
|
| |||
| A |
| Reproductmachine to ionan authorized dealer for adjustment. DO NOT | |||||
|
|
|
|
|
|
|
| A |
| Figure 12: Turning ignition key to OFF |
|
|
|
|
|
| |
Transmission | Not | ! | WARNING | ! | ||||
Manual Drive Models: |
|
|
|
|
|
|
| |
1. Stop motion of the unit by fully depressingforthe clutch/ |
|
| Figure 15: Blade control |
| ||||
| brake pedal (A, Figure 13) to disengage the clutch and |
|
|
| ||||
| apply the brake. |
|
|
|
|
|
|
|
2. Return the transmission shift lever to the Neutral (‘N’) |
|
|
|
|
| |||
| position. Refer to “How To Engage The Transmission”. |
|
|
|
|
| ||
|
| Once blade is disengaged, it should come to a complete | ||||||
|
|
|
|
| ||||
|
|
|
|
| ||||
|
|
|
|
| stop in 5 seconds or less. If the blade continues to rotate | |||
|
|
|
|
| after 5 seconds, the blade brake must be adjusted. Return | |||
|
|
|
|
| CONTINUE to operate machine until blade brake is adjust- | |||
|
|
|
|
| ed and functioning properly. |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Figure 13: Clutch/brake pedal
Hydro Drive Models:
1.Stop motion of the unit by fully releasing the ground speed pedals (A, Figure 14). Additional braking can be
achieved by depressing the brake pedal (A, Figure 13).
18 | www.snapper.com |
