Whirlpool GHW9300PW0 Drain System

6
Recommended installation spacing for recessed or
closet installation, with stacked washer and dryer
The dimensions shown are for the recommended spacing.
Recommended installation spacing for cabinet
installation
■The dimensions shown are for the recommended spacing.
■For cabinet installation, with a door, the minimum ventilation
openings in the top are required.
Drain System
The washer can be installed using the standpipe drain system
(floor or wall), the laundry tub drain system, or the floor drain
system. Select the drain hose installation method you need. See
“Tools and Parts.”
Standpipe drain system - wall or floor (views A & B)
The standpipe drain requires a minimum diameter standpipe of
2" (5 cm). The minimum carry-away capacity can be no less than
17gal. (64 L) per minute.
The top of the standpipe must be at least 30" (76.2 cm) high and
no higher than 96"(2.4 m) from the bottom of the washer.
*Min. top and bottom air openings for closet door.
**External exhaust elbow requires additional space.
***Wall, door and floor molding may require
additional spacing.
48 in.2 *
(310 cm2)
3" (7.6 cm)
6" (15.2 cm)
76"
(193 cm)
27"
(68.6 cm)
3" (7.6 cm)
1" (2.5 cm)
5½"**
(14 cm) 1"***
(2.5 cm) 1"***
(2.5 cm)
24 in.2 *
(155 cm2)
7" (17.8 cm)
9"
(22.9 cm)
7" (17.8 cm)
4"
(1 0.2 cm )31½" (80.0 cm) 27" (68.6 cm)
1"
(2.5 cm) 1" (2.5 cm) 1" (2.5 cm)
30" min.
(76.2 cm)
AB