Reverse Door Catch

1.Remove the white decorative screws from the opposite side of the door and set aside.

2.Remove the screws from the magnetic door catch and replace it on the opposite side of the door.

3.Install the white decorative screws on the opposite side of the door.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

4.Plug into a grounded 3 prong outlet.

Leveling

1.Move the ice maker to its final location.

NOTE: If this is a built-in installation, move the ice maker as close as possible to the final location.

2.Place the level on top of the product to see whether the ice maker is level from front to back and side to side.

3.Push up on the top front of the ice maker, and then locate the leveling screws that are on the bottom front of the ice maker.

4.Using an adjustable wrench, change the height of the legs as follows:

■Turn the leveling leg to the right to lower that side of the ice maker.

■Turn the leveling leg to the left to raise that side of the ice maker.

NOTE: The ice maker should not wobble. Use shims to add stability when needed.

5.Push up on the top rear of the ice maker and locate the leveling legs that are on the bottom rear of the ice maker.

6.Follow the instructions in Step 4 to change the height of the legs.

7.Use the level to recheck the ice maker to see that it is even from front to back and side to side. If the ice maker is not level, repeat steps 2 to 5. If the ice maker is level, go to the “Connect Water Supply” section.

Water Filtration System

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

Install the Water Filter

1.Locate the accessory packet in the ice maker and remove the water filter.

2.Take the water filter out of its packaging and remove the cover from the O-rings. Be sure the O-rings are still in place after the cover is removed.

It is important for the ice maker to be level in order to work properly. Depending upon where you install the ice maker, you may need to make several adjustments to level it. You may also use the leveling legs to lower the height of the ice maker for undercounter installations.

Tools Needed

Gather the required tools and parts before starting installation.

■9" level

■Adjustable wrench

NOTE: It is easier to adjust the leveling legs if you have another person to assist you.

A

B D C

A. Cover

C. Alignment pin

B. O-rings

D. Alignment arrow

11

Page 10 Page 12
Page 11
Image 11
Whirlpool GI15NDXZB, GI15NDXZQ, GI15NDXZS Leveling, Water Filtration System, Reverse Door Catch, Install the Water Filter
Page 10 Page 12

GI15NDXZS, GI15NDXZQ, GI15NDXZB specifications

The Whirlpool GI15NDXZB, GI15NDXZQ, and GI15NDXZS are versatile and stylish ice makers designed to enhance any kitchen or home bar area. These models stand out for their sleek design, compact size, and user-friendly features, making them ideal for those looking to enjoy the luxury of freshly-made ice at home.

One of the main features of these models is their production capacity. Each unit can produce up to 35 pounds of ice per day, ensuring that you never run out, whether you're hosting a party or enjoying a quiet evening at home. The ice maker uses a state-of-the-art compressor cooling system which not only supports efficient production but also helps maintain consistent ice quality. The bin capacity is also impressive, accommodating up to 28 pounds of ice, meaning less frequent refills and more convenience for users.

In terms of design, these models boast a modern stainless steel exterior, with finishes available in bold black, classic white, and sleek stainless steel. This variety allows for easy integration into any kitchen decor or style. The reversible door feature adds flexibility in placement, making it easy to fit the unit in different spaces.

The Whirlpool GI15NDXZB, GI15NDXZQ, and GI15NDXZS also integrate innovative technologies that enhance functionality. One such technology is the advanced filtration system that improves water quality, ensuring that the ice produced is crystal clear and tastes great. The units are designed with a quiet operation feature, making them suitable for any environment, including open-concept spaces or entertainment areas.

Moreover, these models include an automatic shutoff feature that activates when the ice bin is full, preventing overflow and minimizing waste. They also have a simple control panel that allows users to easily turn the machine on and off, as well as monitor the ice production status.

Maintenance is straightforward, with a removable ice bin that simplifies cleaning and filling. The interior surfaces are designed for easy wipe-down, helping to maintain hygiene with minimal effort.

In summary, the Whirlpool GI15NDXZB, GI15NDXZQ, and GI15NDXZS ice makers combine efficiency, style, and convenience. With their robust ice production capabilities, modern aesthetics, and user-friendly features, these units make a valuable addition to any home, enabling users to enjoy cold drinks and ice in a hassle-free manner.
Top Page Image Contents