USING YOUR RANGE
USING THE SURFACE COOKING AREAS (CONT.)
Home canning information
To protect your range:
•Use
|
|
|
|
|
|
| Canners with rippled or |
|
|
|
|
|
|
| ridged bottoms do not |
|
|
|
|
|
|
| allow good contact with |
|
|
|
|
|
|
| |
1" |
|
|
|
|
| 1" the surface. | |
|
|
|
|
|
|
| • Center the canner over |
|
|
|
|
|
|
| the largest surface |
|
|
|
|
|
|
| cooking area. Do not |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| extend more than one |
Surface | Pan |
| |||||
| inch outside the surface | ||||||
cooking area |
|
|
|
| |||
|
|
|
| cooking area. Large | |||
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
diameter canners/pans, if not centered correctly, |
trap heat and can cause damage to the cooktop.
•Alternate use of the surface cooking areas between batches or prepare small batches at a time.
•Start with hot water, cover with a lid, and bring to a boil; then reduce heat to maintain a boil or required pressure levels in a pressure canner.
•On coil element model, keep your reflector bowls clean so that they will always reflect heat well.
•For
•Do not place your canner on two surface cooking areas at the same time.
•The type of material the canner is made of determines the length of heating time. Refer to the “Characteristics of cookware materials” chart later in this section for more information.
•When canning for long periods of time, allow elements and the surrounding surfaces to cool down.
Optional canning kit
(Coil element model)
Most
continued on next page
9