Cycle Selection Charts

Cycle Selection Charts

Select the wash cycle and options desired and press START/ RESUME. The dishwasher starts filling once you press START/ RESUME, unless you select a delay wash. You can change cycles and options as the machine is filling.

After completing a wash cycle, the dishwasher remembers the cycle and options. It uses the same cycle and options again in the next wash cycle, if you press only START/RESUME.

NOTE: If the door is opened during a cycle or the power is interrupted, the Start/Resume indicator flashes. The cycle will not resume until the door is closed and Start/Resume is pressed.

A “●” shows what steps are in each cycle. Your model may have some or all of the cycles shown.

Display time is for models with the dual digit display on the console.

These models meet the ENERGY STAR® guidelines for energy efficiency.

Temperatures indicate where extra heat is added. The cycle countdown (on some models) pauses at these points until water reaches the temperature.

Water usage is shown in U.S. gallons/liters.

Pots & Pans

Use this cycle for hard-to-clean, heavily soiled pots, pans, casseroles, and regular tableware. During the wash, the wash action will repeatedly pause for several seconds.

Initial display time after rotating clock pattern: 92-99 min.

Use both detergent dispenser sections.

Pre-

Main

Rinse

Rinse

Final

Dry

Mini-

Water

Wash

Wash

 

 

Heated

 

mum

Usage

 

 

 

 

Rinse

 

Time

(gal/L)

 

 

 

 

 

 

(min)

 

 

99*

6.9-7.8/

 

140°F

 

 

140°F

 

Light

26.1-29.6

 

(60°C)

 

 

(60°C)

 

soil

 

Normal

Use this cycle for loads with normal amounts of food soil. (The energy-usage label is based on this cycle.) During the wash, the wash action will repeatedly pause for several seconds.

Initial display time after rotating clock pattern: 64-84 min.

Use both detergent dispenser sections.

Pre-

Main

Purge

Rinse

Final

Dry

Mini-

Water

Wash

Wash

 

 

Heated

 

mum

Usage

 

 

 

 

Rinse

 

Time

(gal/L)

 

 

 

 

 

 

(min)

 

 

71*

5.6-6.8/

 

120°F

 

 

140°F

 

Light

21.2-25.7

 

(49°C)

 

 

(60°C)

 

soil

 

Light

Use this cycle for lightly soiled items or china and crystal. During the wash, the wash action will repeatedly pause for several seconds.

Initial display time after rotating clock pattern: 68-81 min.

Use main detergent dispenser section.

Rinse

Main

Purge

Rinse

Final

Dry

Mini-

Water

 

Wash

 

 

Heated

 

mum

Usage

 

 

 

 

Rinse

 

Time

(gal/L)

 

 

 

 

 

 

(min)

 

 

77*

5.9-6.8/

 

120°F

 

 

135°F

cycled

Light

22.3-25.7

 

(49°C)

 

 

(57°C)

 

soil

 

Short Wash

Use this cycle to quickly wash prerinsed glasses or dish loads. This cycle does not dry.

NOTE: Time and water use do not vary in this cycle.

Initial display time after rotating clock pattern: 29 min.

Use main detergent dispenser section.

Pre-

Main

Rinse

Rinse

Final

Dry

Mini-

Water

Wash

Wash

 

 

Heated

 

mum

Usage

 

 

 

 

Rinse

 

Time

(gal/L)

 

 

 

 

 

 

(min)

 

 

 

30

6.9/26.0

 

 

 

 

 

 

 

 

Rinse Only

Use this rinse cycle for rinsing dishes, glasses, and silverware that will not be washed right away.

Initial display time after rotating clock pattern: 3 min.

Do not use detergent with this cycle.

Pre-

Main

Rinse

Rinse

Final

Dry

Time

Water

Wash

Wash

 

 

Heated

 

(min)

Usage

 

 

 

 

Rinse

 

 

(gal/L)

 

 

 

 

 

 

 

 

 

 

 

 

 

10

1.8-/6.8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*If the incoming water is less than the recommended temperature or food soils are heavy, the cycle will automatically compensate by adding time, heat, and water as needed.

10

Page 10
Image 10
Whirlpool IUD8000R manual Cycle Selection Charts, Pots & Pans, Normal, Light, Short Wash, Rinse Only